Applied Electromagnetics

Author Index

A

Abbasi Arand, Bijan Design, Simulation and Fabrication of a Wideband Microstrip Antenna Using Multilayered Structure and Parasitic Element in Ku-Band [Volume 9, Issue 1, 2021, Pages 63-70]
Abdolali, Behrouz Improving the model of Permanent Magnet Brushed DC Motor Used in Automotive Industry for Sensorless Speed Estimation [Volume 11, Issue 1, 2023, Pages 51-59]
Abdoli Arani, Abbas Calculation of the resonance frequency of a toroidal plasma [Volume 9, Issue 2, 2022, Pages 63-70]
Abdoli Arani, Abbas Effect of strong uniform axial magnetic field on the TE and TM modes fields and injected electron dynamic in the plasma waveguide with Piet Hein cross section [Volume 10, Issue 2, 2022, Pages 125-138]
Abdoli Arani, Abbas Excitation and amplification of hybrid modes in circular-elliptic combined plasma waveguides including relativistic electron beam [Volume 11, Issue 1, 2023, Pages 61-73]
Abdollahi, Seyed Ehsan Presentation of a Generalized Method for Rotor Design of Synchronous Reluctance Machine [Volume 7, Issue 1, 2019, Pages 39-51]
Abdollahi, Seyed Ehsan Rotor Tooth Number Effect on the Performance of a Double Stator Flux Switching Motor with Low Cost Magnets [Volume 7, Issue 2, 2020, Pages 45-52]
Abdollahi, Seyed Ehsan Optimal Design of a 250 Kw Doubly Fed Induction Generator [Volume 8, Issue 2, 2021, Pages 1-7]
Abdollahi, Seyed Ehsan An Analytical Calculation of Self- and Mutual Inductances of Rectangular Flat Polarized Coils with Displacement in the Vertical Direction [Volume 10, Issue 1, 2022, Pages 1-13]
Abdollahi, Seyedreza An Analytical Calculation of Self- and Mutual Inductances of Rectangular Flat Polarized Coils with Displacement in the Vertical Direction [Volume 10, Issue 1, 2022, Pages 1-13]
Abrahimi, Mohammad Behnam Effect of strong uniform axial magnetic field on the TE and TM modes fields and injected electron dynamic in the plasma waveguide with Piet Hein cross section [Volume 10, Issue 2, 2022, Pages 125-138]
Adabi, Jafar Design of A New Structure for Transmitter and Receiver Coils in Wireless Transmission Systems with low Sensitivity in [Volume 7, Issue 2, 2020, Pages 17-24]
Adabi Firouzjaee, Jafar Technical and Economical Assessment of the Efficiency Improvement of Induction Motors after Rewinding [Volume 8, Issue 1, 2020, Pages 17-26]
Afkham, Hamed Analysis and Simulation of Influence of The Silver Ribbon Nanoparticle’s Dimensions and Refractive Index on The Efficiency of Plasmonic Amorphous Silicon Solar Cell [Volume 7, Issue 1, 2019, Pages 9-16]
Afsari, seyed Ahmadreza Performance Analysis and Optimization of a Novel Arcuate Double-sided Magnetic Gear using Quasi 3-D Analytical Modeling, for wind power application [Volume 6, Issue 2, 2018, Pages 1-9]
Afsari Kashani, Seyed Ahmadreza Optimal Design of Magnetic Geared PM Synchronous Motor Pole Shape to Improve Magnetic Field Distribution and reduce Cogging Torque [Volume 8, Issue 1, 2020, Pages 53-59]
Afsari Kashani, Seyed Ahmadreza Cogging Torque Reduction Using Axial Pole Shaping in IPM Coaxial Magnetic Gear [Volume 10, Issue 2, 2022, Pages 71-79]
Ahmadi, Mohammad Analytical Design and Simulation of a Corrugated Rectangular Waveguide Based on the Principles of the Backward-Wave Oscillator for Communication Band of THz Regime to Work in Troposphere [Volume 7, Issue 2, 2020, Pages 25-32]
Alavi, Seyed Mohammad Voltage Control of Magnetron Power Supply Utilizing Active Clamp Flyback Converter [Volume 7, Issue 1, 2019, Pages 73-81]
Alipour-Sarabi, Ramin Eccentricity Error Detection in Axial Flux Resolvers [Volume 11, Issue 2, 2023, Pages 99-116]
Alizadehfar, Moslem Excitation and amplification of hybrid modes in circular-elliptic combined plasma waveguides including relativistic electron beam [Volume 11, Issue 1, 2023, Pages 61-73]
Alizadeh Pahlavani, Mohamad Reza The design and fabrication of a plasma limiter to protect communication systems [Volume 10, Issue 1, 2022, Pages 99-107]
Alizadeh Pahlavani, Mohammad Reza Finite Element-based Simulation of low-frequency AC Arc Furnace and Extraction of Arc Physical characteristics to investigate the stability of electric arcs with dynamic behavior [Volume 8, Issue 2, 2021, Pages 65-79]
Alizadeh Pahlavani, Mohammad Reza 3D Simulation of Armature Motion in Electromagnetic Rail Launchers Using Finite Element Method [Volume 10, Issue 2, 2022, Pages 55-70]
Alizadeh Pahlavani, Mohammad Reza Design and Electromagnetic Analysis of Three Stage Induction Coilgun System Utilizing Finite Element Method [Volume 8, Issue 1, 2020, Pages 97-106]
Alkasir, Ali An Analytical Calculation of Self- and Mutual Inductances of Rectangular Flat Polarized Coils with Displacement in the Vertical Direction [Volume 10, Issue 1, 2022, Pages 1-13]
Allahyari, Mojtaba Modeling of Electromagnetic Railgun and Analysis of its Performance [Volume 7, Issue 1, 2019, Pages 61-72]
Amini, M. H. On the Analysis of Electromagnetic Susceptibility of Superconducting Microstrip Transmission Lines in Oblique Incidence [Volume 9, Issue 1, 2021, Pages 51-54]
Amniat-Talab, Mahdi Amniat-Talab Mode Instability in the Ytterbium Doped Fiber Amplifier [Volume 8, Issue 2, 2021, Pages 33-43]
Arab Khorasani, Ali Design of a Hybrid Enhanced Photocathode Based on Plasmonic Nano-Grating [Volume 9, Issue 2, 2022, Pages 27-33]
Arab Markade, Gholamreza Analytical Modeling of Eccentric SPM Vernier Machine [Volume 7, Issue 2, 2020, Pages 53-62]
Aribi, Tohid Directional MIMO Slot Antenna Array and its Application for ITU-R F.386-9 & IEEE 802.11ac [Volume 11, Issue 2, 2023, Pages 25-31]
Asadi, Farogh Rotor Tooth Number Effect on the Performance of a Double Stator Flux Switching Motor with Low Cost Magnets [Volume 7, Issue 2, 2020, Pages 45-52]
Asadi, Shahrooz Design and Fabrication of Low Noise Oscillator Using Active Dielectric Resonator [Volume 6, Issue 2, 2018, Pages 43-51]
Asayesh, Seyed Ali The Presentation of a Low Noise UWB Amplifier Using an Inverter with Inductive Peaking Technique [Volume 10, Issue 1, 2022, Pages 109-120]
Askari Chavorchi, M. Radiation pattern and beamforming of a two dimensional pulsed FDA array [Volume 8, Issue 1, 2020, Pages 9-16]
Azmi, Paeez Fading Model Deviation in the NLOS Channel at Limited Reflection [Volume 7, Issue 1, 2019, Pages 89-97]

B

Baghaei Nejad, Majid Design of a Low-Noise Amplifier MMIC Using the 0.15μm InGaAs pHEMT Technology for Ka-band Application [Volume 8, Issue 2, 2021, Pages 81-87]
Bagheri Naghneh, Hosein Dynamic modeling and investigation of the rotor circuit influence on the no-load characteristics of brushless doubly fed induction machine [Volume 8, Issue 2, 2021, Pages 97-106]
Bagheri Naghneh, Hosein The Enhancement of the brushless doubly-fed induction machine characteristics using a new rotor circuit [Volume 10, Issue 1, 2022, Pages 69-79]
Baharvand, Mehdi Design and Electromagnetic Analysis of Three Stage Induction Coilgun System Utilizing Finite Element Method [Volume 8, Issue 1, 2020, Pages 97-106]
Bahmani‑Firouzi, Bahman Thermal and Vibration Analysis of a Dual Stator Consequent-Pole Vernier PM Machine with High Torque Density for application in Electric Vehicles [Volume 10, Issue 2, 2022, Pages 93-104]
Banaei, Mohamad Reza Voltage Control of Magnetron Power Supply Utilizing Active Clamp Flyback Converter [Volume 7, Issue 1, 2019, Pages 73-81]
Bazr Afshan, J. Design and Implementation of a Highly Efficient Wireless Power Transfer System Using Magnetic Spiral Resonant Coupling [Volume 8, Issue 2, 2021, Pages 17-23]
Behjat, Abbas Spectroscopic characterization of asphaltene deposition extracted from oil wells at the southwest of Iran using Raman and FT-IR spectroscopy [Volume 11, Issue 1, 2023, Pages 41-50]
Bekrani, Mehdi The Presentation of a Low Noise UWB Amplifier Using an Inverter with Inductive Peaking Technique [Volume 10, Issue 1, 2022, Pages 109-120]
Beyranvand, Reza Numerical Modeling of a Compact and High Contrast Reversible All Optical Feynman Gate with Nonlinear Kerr Effects Based on Two Dimensional Photonic Crystals [Volume 9, Issue 2, 2022, Pages 9-15]
Bijari, Abolfazl Low Noise Figure and High Conversion Gain CMOS LNA-Mixer for WLAN Applications [Volume 6, Issue 2, 2018, Pages 19-31]
Bionghy, Amir Design of a Low-Noise Amplifier MMIC Using the 0.15μm InGaAs pHEMT Technology for Ka-band Application [Volume 8, Issue 2, 2021, Pages 81-87]

D

Daemi, Mohammad hoseein Measurement of the Wedge Angle and Bending of the Two Faces of the Laser Disk Active Medium Using a Single Shot Interference Pattern [Volume 9, Issue 2, 2022, Pages 59-62]
Dalili Oskouyi, H. R. Design, Simulation and Fabrication of Ultra-Wide-Band Electromagnetic Waves Absorber with Optimal Dimensions Based on Metamaterial [Volume 9, Issue 1, 2021, Pages 55-61]
Damaki Aliabad, Ali Akbar Optimal Design and analysis of an electromagnetic fault current limiter based on rotating variable reactor [Volume 11, Issue 1, 2023, Pages 115-126]
Damavandi Kamali, F. Calculation of Attenuation in Rain Medium with Realistic Rain drops Shapes Modeling by the FDTD Method [Volume 8, Issue 1, 2020, Pages 1-7]
Danaeian, Mostafa A Compact Narrow Band-Pass Filter Based on Composite Right-Left Handed Structures for WLAN Application [Volume 7, Issue 1, 2019, Pages 29-38]
Danaeian, Mostafa Design and Fabrication of the Miniaturized Ultra-Wide Band Pass Filter Using the Microstrip Rectangular Ring Loaded by Open Stubs [Volume 8, Issue 2, 2021, Pages 9-15]
Daneshmandi, Alireza Design and construction of high frequency transformers based on resonance converter [Volume 11, Issue 1, 2023, Pages 21-29]
Dehestani Kolagar, Arash Finite Element-based Simulation of low-frequency AC Arc Furnace and Extraction of Arc Physical characteristics to investigate the stability of electric arcs with dynamic behavior [Volume 8, Issue 2, 2021, Pages 65-79]
Dehestani Kolagar, Arash 3D Simulation of Armature Motion in Electromagnetic Rail Launchers Using Finite Element Method [Volume 10, Issue 2, 2022, Pages 55-70]
Dehestani Kolagar, Arash Design and Electromagnetic Analysis of Three Stage Induction Coilgun System Utilizing Finite Element Method [Volume 8, Issue 1, 2020, Pages 97-106]
Dehghani, Mohammad Sadegh Design of Power Divider Based on Gap Waveguide Technology for Use in Low Sidelobe Level 60-GHz Slot Array Antenna [Volume 7, Issue 2, 2020, Pages 97-104]
Dolatabady, Alireza Design and Simulation of X-Band Microstrip Butler Matrix for Feeding the Narrow Beam-Width Phase Array Antenna [Volume 11, Issue 1, 2023, Pages 9-20]

E

Ebrahimzadeh, A. Calculation of Attenuation in Rain Medium with Realistic Rain drops Shapes Modeling by the FDTD Method [Volume 8, Issue 1, 2020, Pages 1-7]
Eyvazi, K. Optimizing Plasmonic Color Filter for Imaging Sensor [Volume 7, Issue 2, 2020, Pages 105-112]

F

Fallah, Mohsen Design, Simulation and Fabrication of a Wideband Microstrip Antenna Using Multilayered Structure and Parasitic Element in Ku-Band [Volume 9, Issue 1, 2021, Pages 63-70]
Farajzadeh, Amin Analysis of Spark Gap Shape Effect on the Output Voltage Waveform of Blumlein Bipolar Pulse Former [Volume 7, Issue 2, 2020, Pages 63-73]
Farajzadeh, Amin Physical Design Considerations of Blumlein Bipolar Pulse Former [Volume 8, Issue 2, 2021, Pages 53-63]
Farhid, Morteza Design, manufacture and testing of integrated three-axis magnetic torque cube satellite on driver board [Volume 11, Issue 2, 2023, Pages 33-41]
Farmani, Ali Numerical Modeling of a Compact and High Contrast Reversible All Optical Feynman Gate with Nonlinear Kerr Effects Based on Two Dimensional Photonic Crystals [Volume 9, Issue 2, 2022, Pages 9-15]
Faryadras, Reza The Proposal of a 2-DOF Resolver for Linear Motion [Volume 10, Issue 1, 2022, Pages 81-90]
Fayyazi, Hossein Examination and simulation of the electromagnetic impact on electronic components [Volume 10, Issue 2, 2022, Pages 115-124]
Fazljoo, Seyed Amin Optimal Design and analysis of an electromagnetic fault current limiter based on rotating variable reactor [Volume 11, Issue 1, 2023, Pages 115-126]
Feshki Farahani, H. Analysis and optimization of Triple-speed Coaxial Magnetic Gears [Volume 9, Issue 1, 2021, Pages 27-34]
Feshki Farahani, Hassan Analysis of a Coaxial Consequent-Pole Magnetic Gear based on Magnetic equivalent circuit [Volume 9, Issue 1, 2021, Pages 79-88]
Foroodi, Mehrdad INVESTIGATION OF THE EFFECT OF CABLE JOINT ON THE MAGNETIC FIELDS AROUND UNDERGROUND POWER CABLES [Volume 8, Issue 2, 2021, Pages 89-96]

G

Ghaempanah, Alireza Review on In-service Efficiency Estimation of Three Phase Induction Motors [Volume 10, Issue 2, 2022, Pages 35-53]
Ghalibafan, Javad Analysis and Design of a High Pass Waveguide Filter of the Ferrite Blade with Tunable Rejection Band [Volume 8, Issue 2, 2021, Pages 25-31]
Ghani, Armin Conformal Array Antenna for Optimized DOA Estimation Performance [Volume 6, Issue 2, 2018, Pages 11-17]
Ghattan Kashani, Zahra Design and Fabrication of an Atmospheric Parameter Monitoring System for Weather Forecast [Volume 7, Issue 2, 2020, Pages 33-43]
Ghayoumi-Zadeh, Hossein A Compact Narrow Band-Pass Filter Based on Composite Right-Left Handed Structures for WLAN Application [Volume 7, Issue 1, 2019, Pages 29-38]
Gholami, Mohammad An Investigation on the Effect of Different Discharge Electrode Geometries on the Performance of the Spiked Electrode-Plate Electrostatic Precipitator [Volume 10, Issue 1, 2022, Pages 55-68]
Gholami, Mohammad Numerical Evaluation of Electrohydrodynamic Flow and Particle Concentration Effects on the Wire-Plate Electrostatic Precipitator Efficiency [Volume 10, Issue 2, 2022, Pages 1-11]
Gholamian, Sayyed Asghar Presentation of a Generalized Method for Rotor Design of Synchronous Reluctance Machine [Volume 7, Issue 1, 2019, Pages 39-51]
Gholamian, Sayyed Asghar Rotor Tooth Number Effect on the Performance of a Double Stator Flux Switching Motor with Low Cost Magnets [Volume 7, Issue 2, 2020, Pages 45-52]
Gholamian, Sayyed Asghar Optimal Design of a 250 Kw Doubly Fed Induction Generator [Volume 8, Issue 2, 2021, Pages 1-7]
Gholamian, Sayyed Asghar Optimized Design to reduce cogging torque in flux reversal motor [Volume 10, Issue 2, 2022, Pages 81-91]
Golrokh Joubeni, Mostafa Design, Simulation, and Implementation of an induction electric heater up to 300 ° C [Volume 7, Issue 2, 2020, Pages 75-86]
Gorginpour, Hamed Thermal and Vibration Analysis of a Dual Stator Consequent-Pole Vernier PM Machine with High Torque Density for application in Electric Vehicles [Volume 10, Issue 2, 2022, Pages 93-104]
Great cream, Muhammad The introduction of a new structure of the InGaAs / Si SACM APD avalanche photodiode for detection at 1550 nm radiation wavelength [Volume 10, Issue 1, 2022, Pages 37-45]

H

Haghgoo rostami, Reza The investigation and simulations of the suspension insulator string offset effects on the voltage and electric field distributions using the finite element method [Volume 10, Issue 1, 2022, Pages 91-97]
Hasani, Ali Design, Simulation, and Fabrication of High Power Radial Line Slot Array Antennas [Volume 11, Issue 1, 2023, Pages 75-85]
Hasani, Ali simulation of high power phase shifter using 90 degree hybrid coupler [Volume 11, Issue 2, 2023, Pages 87-97]
Hasanshahi, Ali The experimental design of an optimal gas pressure sensor, based on the Fabry-Perot optical fiber with regard to the effect of thickness on sensor sensitivity [Volume 10, Issue 1, 2022, Pages 121-127]
Hasanshahi, Zabihollah Fading Model Deviation in the NLOS Channel at Limited Reflection [Volume 7, Issue 1, 2019, Pages 89-97]
Hashemi, Ali A Novel Method for Field Analysis, Design and Construction of a Lifting Electromagnet [Volume 7, Issue 1, 2019, Pages 99-107]
Heydarian, khosro Simulation and analysis of the all-optical NOT logic gate by XPM mechanism using Mach-Zehnder interferometer based on photonic crystal semiconductor optical amplifier [Volume 11, Issue 2, 2023, Pages 55-66]
Heydari-Dayeni, Mahdi Simulation and Fabrication of Tapered Fiber Optics Hydrogen Sensor [Volume 6, Issue 1, 2018, Pages 15-21]
Hojat Kashani, Farokh Presentation of an Algorithm for Design, Simulation and Construction of a Triple Frequency Leaky-wave Antenna Based on the Holographic Technique [Volume 9, Issue 2, 2022, Pages 47-58]
Hosseini Aliabadi, M. Analysis and optimization of Triple-speed Coaxial Magnetic Gears [Volume 9, Issue 1, 2021, Pages 27-34]
Hosseinzadeh, Shahram Voltage Control of Magnetron Power Supply Utilizing Active Clamp Flyback Converter [Volume 7, Issue 1, 2019, Pages 73-81]

I

Izadi, Seyed Amin Design and Fabrication of an Atmospheric Parameter Monitoring System for Weather Forecast [Volume 7, Issue 2, 2020, Pages 33-43]
Izan, Roghaye Spectroscopic characterization of asphaltene deposition extracted from oil wells at the southwest of Iran using Raman and FT-IR spectroscopy [Volume 11, Issue 1, 2023, Pages 41-50]

J

Jafarfard, Mohammad Reza Measurement of the Wedge Angle and Bending of the Two Faces of the Laser Disk Active Medium Using a Single Shot Interference Pattern [Volume 9, Issue 2, 2022, Pages 59-62]
Jafri Moghaddam, Mehdi Magnetic Anomaly Detection Method with Empirical Mode Decomposition and Minimum Entropy Feature [Volume 11, Issue 1, 2023, Pages 107-114]
Jamshidi Ghaleh, Kazem Jamshidi Ghaleh Mode Instability in the Ytterbium Doped Fiber Amplifier [Volume 8, Issue 2, 2021, Pages 33-43]

K

Kaboli, Sh. Physical Design Considerations of Blumlein Bipolar Pulse Former [Volume 8, Issue 2, 2021, Pages 53-63]
Kaboli, Sh. Protection Considerations of High Power Vacuum Tubes Against Reflected Power Fault [Volume 9, Issue 1, 2021, Pages 9-15]
Kaboli, Shahriyar Analysis of Spark Gap Shape Effect on the Output Voltage Waveform of Blumlein Bipolar Pulse Former [Volume 7, Issue 2, 2020, Pages 63-73]
Karami, M. A. Optimizing Plasmonic Color Filter for Imaging Sensor [Volume 7, Issue 2, 2020, Pages 105-112]
Karimi, maryam Determination of Damavand Tokamak Laser Interferometer System Characteristics by Means of Identifying and Evaluating the Sources of Error in Plasma Electron Density Measurement [Volume 7, Issue 1, 2019, Pages 109-119]
Kazemi, Reza Design, Simulation and Fabrication of a Wideband Microstrip Antenna Using Multilayered Structure and Parasitic Element in Ku-Band [Volume 9, Issue 1, 2021, Pages 63-70]
Kazerooni, Hanif An Investigation on the Effect of Different Discharge Electrode Geometries on the Performance of the Spiked Electrode-Plate Electrostatic Precipitator [Volume 10, Issue 1, 2022, Pages 55-68]
Kazerooni, Hanif Numerical Evaluation of Electrohydrodynamic Flow and Particle Concentration Effects on the Wire-Plate Electrostatic Precipitator Efficiency [Volume 10, Issue 2, 2022, Pages 1-11]
Keyvanlou, Ali A High-Resolution Active Microwave Sensor for Contactless Pressure Measurement [Volume 11, Issue 1, 2023, Pages 31-39]
Khaje zade, Mohammad Fading Model Deviation in the NLOS Channel at Limited Reflection [Volume 7, Issue 1, 2019, Pages 89-97]
Khalaj Amirhossini, Mohammad Design, Simulation, and Fabrication of High Power Radial Line Slot Array Antennas [Volume 11, Issue 1, 2023, Pages 75-85]
Khalili, A. Dynamic Modeling of Unbalanced Magnetic Pull in Eccentric Wound Rotor Induction Machine [Volume 9, Issue 1, 2021, Pages 17-25]
Khalilzadeh, Javad Simulation and Fabrication of Tapered Fiber Optics Hydrogen Sensor [Volume 6, Issue 1, 2018, Pages 15-21]
Khalilzadeh, Javad Design of a Hybrid Enhanced Photocathode Based on Plasmonic Nano-Grating [Volume 9, Issue 2, 2022, Pages 27-33]
Khalilzadeh, Javad The experimental design of an optimal gas pressure sensor, based on the Fabry-Perot optical fiber with regard to the effect of thickness on sensor sensitivity [Volume 10, Issue 1, 2022, Pages 121-127]
Khodadadi, -Hamid Reza Magnetic Anomaly Detection Method with Empirical Mode Decomposition and Minimum Entropy Feature [Volume 11, Issue 1, 2023, Pages 107-114]
Khodadadi, H. R. Design of 100Gbps four-channel WDM communication link with Dual-Polarization transmission technology and Coherence receiver in the presence of EDFA optical amplifier [Volume 9, Issue 1, 2021, Pages 1-7]
Khodsouz, Masoumeh Magnetic and Electric Fields Minimization of Transmission Lines Using NSGA-II Algorithm Based on Multi-Objective Optimization [Volume 7, Issue 2, 2020, Pages 87-95]
Khodsouz, Masoumeh An intelligent computational method to estimate the electric and magnetic field power frequency of distribution network using neural network based on normalized radial basis functions [Volume 8, Issue 1, 2020, Pages 107-116]
Khodsuz, Masume The investigation and simulations of the suspension insulator string offset effects on the voltage and electric field distributions using the finite element method [Volume 10, Issue 1, 2022, Pages 91-97]
Khojeh, Golnaz Calculation of the resonance frequency of a toroidal plasma [Volume 9, Issue 2, 2022, Pages 63-70]
Komjani, Nader Presentation of an Algorithm for Design, Simulation and Construction of a Triple Frequency Leaky-wave Antenna Based on the Holographic Technique [Volume 9, Issue 2, 2022, Pages 47-58]

L

Lexian, Hosein Optimum Design of A Miniaturized Electromagnetic Generator for Electrical Energy Supply of A Small Size Projectile’s Fuse [Volume 7, Issue 1, 2019, Pages 17-28]

M

Malekzadeh, Abdollah EIT-based nanostructure detectors for detecting materials using terahertz waves [Volume 6, Issue 1, 2018, Pages 41-48]
Mallahzadeh, A. R. On the Analysis of Electromagnetic Susceptibility of Superconducting Microstrip Transmission Lines in Oblique Incidence [Volume 9, Issue 1, 2021, Pages 51-54]
Mansoursamaei, Mohsen A new simulation method for calculating of temperature and strain at the same time by fiber Bragg grating sensor [Volume 11, Issue 1, 2023, Pages 1-8]
Mansoursamaei, Mohsen Measurement of environmental parameters of temperature and strain at the same time with a uniform fiber Bragg grating [Volume 11, Issue 2, 2023, Pages 11-16]
Mehrabi, S. Validity of RLC Equivalent Circuit of Grounding Electrodes in Combination with Equivalent Resistivity in Two-layer Soils and Its Application in Transient Analysis of Arrester-Connected Overhead Lines under Lightning Strike [Volume 9, Issue 1, 2021, Pages 35-42]
Mehramiz, Ahmad Instability of ultrasonic waves in a semiconductor quantum medium [Volume 6, Issue 1, 2018, Pages 9-14]
Mehrshahi, Esfandiyar Indoor Positioning Fingerprint Method Based on Propagation Delay [Volume 7, Issue 2, 2020, Pages 1-8]
Mehrshahii, Esfandiar Design and Fabrication of Low Noise Oscillator Using Active Dielectric Resonator [Volume 6, Issue 2, 2018, Pages 43-51]
Mirimani, Seyyed Mehdi Design of A New Structure for Transmitter and Receiver Coils in Wireless Transmission Systems with low Sensitivity in [Volume 7, Issue 2, 2020, Pages 17-24]
Mirimani, Seyyed Mehdi Technical and Economical Assessment of the Efficiency Improvement of Induction Motors after Rewinding [Volume 8, Issue 1, 2020, Pages 17-26]
Moazami Goodarzi, Hamed Design and Simulation of X-Band Microstrip Butler Matrix for Feeding the Narrow Beam-Width Phase Array Antenna [Volume 11, Issue 1, 2023, Pages 9-20]
MOEINI, SAM Design and Construction of a Wide Band Antenna with Circular Polarization [Volume 7, Issue 1, 2019, Pages 83-88]
MOEINI, SAM Design and Implementation of a Highly Efficient Wireless Power Transfer System Using Magnetic Spiral Resonant Coupling [Volume 8, Issue 2, 2021, Pages 17-23]
Moghimi, A. Analysis and optimization of Triple-speed Coaxial Magnetic Gears [Volume 9, Issue 1, 2021, Pages 27-34]
Mohammadi, M. Analysis and Design of a High Pass Waveguide Filter of the Ferrite Blade with Tunable Rejection Band [Volume 8, Issue 2, 2021, Pages 25-31]
Mohammadi, Sirous Conformal Array Antenna for Optimized DOA Estimation Performance [Volume 6, Issue 2, 2018, Pages 11-17]
Mohammadimasoudi, Mohammad Design of self-activating light intensity filter based on thermoplasmics and liquid crystals and simulation of thermal effects caused by localized surface plasmons of different metals [Volume 11, Issue 2, 2023, Pages 79-86]
Mohammadzadeh, Fallah Design, Simulation, and Fabrication of High Power Radial Line Slot Array Antennas [Volume 11, Issue 1, 2023, Pages 75-85]
Mohebzadeh Bahabady, Ahmad Design of an All-Optical AND Logic Gate based on Photonic Crystal with Small Dimensions Suitable for Integrated Optical Circuits [Volume 6, Issue 2, 2018, Pages 53-59]
Mohseni armaki, Seyyed Hossein Design and Construction of a Wide Band Antenna with Circular Polarization [Volume 7, Issue 1, 2019, Pages 83-88]
Mohseni armaki, Seyyed Hossein Design, Simulation and Fabrication of a Wideband Microstrip Antenna Using Multilayered Structure and Parasitic Element in Ku-Band [Volume 9, Issue 1, 2021, Pages 63-70]
Mohseni Armaki, S. Hossein Beam width expansion of microstrip array antenna by wide angle impedance matching layer [Volume 6, Issue 1, 2018, Pages 31-39]
Moradi, Hamed The experimental design of an optimal gas pressure sensor, based on the Fabry-Perot optical fiber with regard to the effect of thickness on sensor sensitivity [Volume 10, Issue 1, 2022, Pages 121-127]
Moradi, Hamed Designing and manufacturing of the laboratory optical fiber sensor for detection of the gas pressure by Fabry-Perot method and the investigation of the effect of the polymer material on its sensitivity. [Volume 11, Issue 2, 2023, Pages 117-103]
Mosallanejad, Ali Review on In-service Efficiency Estimation of Three Phase Induction Motors [Volume 10, Issue 2, 2022, Pages 35-53]
Motevasel, Shokofeh Investigation and Numerical Analysis of the Effect of Size, Distance, Position, and Composition of Plasmonic Nanostructures on the Absorption of Perovskite Solar Cells [Volume 8, Issue 2, 2021, Pages 45-51]
Motie Birjandi, A. A. Design of a New Magnetic Coaxial Gearbox [Volume 9, Issue 1, 2021, Pages 43-49]

N

Nabipour, Najme Determination of Damavand Tokamak Laser Interferometer System Characteristics by Means of Identifying and Evaluating the Sources of Error in Plasma Electron Density Measurement [Volume 7, Issue 1, 2019, Pages 109-119]
Naderi, P. Design of a New Magnetic Coaxial Gearbox [Volume 9, Issue 1, 2021, Pages 43-49]
Naderi, Peyman Modeling and Analysis of Single-sided Linear Primary Permanent Magnet Vernier Machine [Volume 8, Issue 1, 2020, Pages 61-67]
Nafar, Ali Design, Simulation And Fabrication of A Low-Cost Smart Antenna with High Radiation Pattern Diversity [Volume 7, Issue 1, 2019, Pages 1-7]
Nasiri, Abolfazl Voltage Control of Magnetron Power Supply Utilizing Active Clamp Flyback Converter [Volume 7, Issue 1, 2019, Pages 73-81]
Nasiri-Gheidari, Zahra An Analytical Modelling of the Linear Resolver Considering the Longitudinal End Effect [Volume 10, Issue 1, 2022, Pages 25-35]
Niknam, Taher Thermal and Vibration Analysis of a Dual Stator Consequent-Pole Vernier PM Machine with High Torque Density for application in Electric Vehicles [Volume 10, Issue 2, 2022, Pages 93-104]
Noori, Ehsanollah Semi-Analytic Evaluation of the Electron Density Distribution of Tokamaks With Central Chord Microwave Interferometer [Volume 9, Issue 2, 2022, Pages 81-86]
Noori, Ehsanollah Investigation of length reduction and radiation power enhancement of short-wavelength free electron laser [Volume 10, Issue 2, 2022, Pages 105-113]
Norozi, Mohammad Design of V Band 4×4 Butler Matrix in Ridge Gap Waveguide Technology [Volume 11, Issue 2, 2023, Pages 17-24]
Nosratpour, Arez Simulation and analysis of the all-optical NOT logic gate by XPM mechanism using Mach-Zehnder interferometer based on photonic crystal semiconductor optical amplifier [Volume 11, Issue 2, 2023, Pages 55-66]

O

Olyaee, Saeed Design of an All-Optical AND Logic Gate based on Photonic Crystal with Small Dimensions Suitable for Integrated Optical Circuits [Volume 6, Issue 2, 2018, Pages 53-59]
Olyaee, Saeed Analysis and Simulation of Influence of The Silver Ribbon Nanoparticle’s Dimensions and Refractive Index on The Efficiency of Plasmonic Amorphous Silicon Solar Cell [Volume 7, Issue 1, 2019, Pages 9-16]
Olyaee, Saeed Investigation and Numerical Analysis of the Effect of Size, Distance, Position, and Composition of Plasmonic Nanostructures on the Absorption of Perovskite Solar Cells [Volume 8, Issue 2, 2021, Pages 45-51]
Ostadzadeh, Saeed Reza Transient Analysis of the Transmission Lines Terminated to Arrester Under Direct Strikes Considering the Nonlinear Phenomenon of Ionization and the Frequency Dependence Effect of Electrical Parameters of Lossy Soil [Volume 9, Issue 2, 2022, Pages 17-25]
Ostadzadeh, S. R. Validity of RLC Equivalent Circuit of Grounding Electrodes in Combination with Equivalent Resistivity in Two-layer Soils and Its Application in Transient Analysis of Arrester-Connected Overhead Lines under Lightning Strike [Volume 9, Issue 1, 2021, Pages 35-42]
Ostovarzadeh, Mohamad Hossein INVESTIGATION OF THE EFFECT OF CABLE JOINT ON THE MAGNETIC FIELDS AROUND UNDERGROUND POWER CABLES [Volume 8, Issue 2, 2021, Pages 89-96]
Ostovarzadeh, Mohamad Hossein Design of V Band 4×4 Butler Matrix in Ridge Gap Waveguide Technology [Volume 11, Issue 2, 2023, Pages 17-24]

P

Pashaei, rasoul Measurement of environmental parameters of temperature and strain at the same time with a uniform fiber Bragg grating [Volume 11, Issue 2, 2023, Pages 11-16]
Paymozd, Ayub An Analytical Modelling of the Linear Resolver Considering the Longitudinal End Effect [Volume 10, Issue 1, 2022, Pages 25-35]

Q

Qaneh Qarehbagh, Yaqob Design, Simulation And Fabrication of A Low-Cost Smart Antenna with High Radiation Pattern Diversity [Volume 7, Issue 1, 2019, Pages 1-7]
Qaneh Qarehbagh, Yaqob Design of a Corrugated Metallic Periodic Leaky Wave Antenna with Constant Depth and Variable Width in the X_band Frequency [Volume 8, Issue 1, 2020, Pages 35-44]
Qaneh Qarehbagh, Yaqob simulation of high power phase shifter using 90 degree hybrid coupler [Volume 11, Issue 2, 2023, Pages 87-97]

R

Rabiee, Abdoreza Dynamic modeling and investigation of the rotor circuit influence on the no-load characteristics of brushless doubly fed induction machine [Volume 8, Issue 2, 2021, Pages 97-106]
Rabiee, Abdoreza The Enhancement of the brushless doubly-fed induction machine characteristics using a new rotor circuit [Volume 10, Issue 1, 2022, Pages 69-79]
Rabiei, A. Dynamic Modeling of Unbalanced Magnetic Pull in Eccentric Wound Rotor Induction Machine [Volume 9, Issue 1, 2021, Pages 17-25]
Rahbar Ayask, Iman 3D Simulation of Armature Motion in Electromagnetic Rail Launchers Using Finite Element Method [Volume 10, Issue 2, 2022, Pages 55-70]
Rahimian, Hadi Design of self-activating light intensity filter based on thermoplasmics and liquid crystals and simulation of thermal effects caused by localized surface plasmons of different metals [Volume 11, Issue 2, 2023, Pages 79-86]
Rahmani, Zeinab Excitation and amplification of hybrid modes in circular-elliptic combined plasma waveguides including relativistic electron beam [Volume 11, Issue 1, 2023, Pages 61-73]
Rajabi, Amirhossein Optimum Design of A Miniaturized Electromagnetic Generator for Electrical Energy Supply of A Small Size Projectile’s Fuse [Volume 7, Issue 1, 2019, Pages 17-28]
Ramezani-Aval, Hosein Electromagnetic Constitutive Relations in Eccentric Rotating Frames [Volume 11, Issue 2, 2023, Pages 66-77]
Ramezannezhad, A. Design of a New Magnetic Coaxial Gearbox [Volume 9, Issue 1, 2021, Pages 43-49]
Razavi Parizi, Seyed Ali Design of V Band 4×4 Butler Matrix in Ridge Gap Waveguide Technology [Volume 11, Issue 2, 2023, Pages 17-24]
Rezaee, Morteza Design of a Low-Noise Amplifier MMIC Using the 0.15μm InGaAs pHEMT Technology for Ka-band Application [Volume 8, Issue 2, 2021, Pages 81-87]
Rezaee, Morteza A High-Resolution Active Microwave Sensor for Contactless Pressure Measurement [Volume 11, Issue 1, 2023, Pages 31-39]
Rezaei-latifi, Ali Design of a type of optical optical spectrometer in the UV- A spectral region [Volume 11, Issue 2, 2023, Pages 1-11]
Rezayatfam, Majid A New Light and Broadband Metamaterial Absorber with 1.4 mm Thicknes for Reducing Radar Cross Section of Objects [Volume 8, Issue 1, 2020, Pages 27-33]
Riahi, Ali Simulation and Fabrication of Tapered Fiber Optics Hydrogen Sensor [Volume 6, Issue 1, 2018, Pages 15-21]
Riahi, Ali The experimental design of an optimal gas pressure sensor, based on the Fabry-Perot optical fiber with regard to the effect of thickness on sensor sensitivity [Volume 10, Issue 1, 2022, Pages 121-127]
Riahi, Ali Designing and manufacturing of the laboratory optical fiber sensor for detection of the gas pressure by Fabry-Perot method and the investigation of the effect of the polymer material on its sensitivity. [Volume 11, Issue 2, 2023, Pages 117-103]
Rostami, Mohsen Modeling and Analysis of Single-sided Linear Primary Permanent Magnet Vernier Machine [Volume 8, Issue 1, 2020, Pages 61-67]

S

Safari Dehnavi, mahboube Beam width expansion of microstrip array antenna by wide angle impedance matching layer [Volume 6, Issue 1, 2018, Pages 31-39]
Saghaei, Hamed Design and Simulation of an Ultra-Fast All-Optical Single-Bit Comparator Based on Photonic Crystal Ring Resonators [Volume 9, Issue 2, 2022, Pages 99-106]
Saneie, Hamid An Analytical Modelling of the Linear Resolver Considering the Longitudinal End Effect [Volume 10, Issue 1, 2022, Pages 25-35]
Saneie, Hamid Improving the model of Permanent Magnet Brushed DC Motor Used in Automotive Industry for Sensorless Speed Estimation [Volume 11, Issue 1, 2023, Pages 51-59]
Sedghi, Tohid Directional MIMO Slot Antenna Array and its Application for ITU-R F.386-9 & IEEE 802.11ac [Volume 11, Issue 2, 2023, Pages 25-31]
Sedighy, seyed hasan Conformal Array Antenna for Optimized DOA Estimation Performance [Volume 6, Issue 2, 2018, Pages 11-17]
Sepahvand, Amir Mode Instability in the Ytterbium Doped Fiber Amplifier [Volume 8, Issue 2, 2021, Pages 33-43]
Seyyedbarzegar, Seyyed Meysam Magnetic and Electric Fields Minimization of Transmission Lines Using NSGA-II Algorithm Based on Multi-Objective Optimization [Volume 7, Issue 2, 2020, Pages 87-95]
Seyyedbarzegar, Seyyed Meysam An intelligent computational method to estimate the electric and magnetic field power frequency of distribution network using neural network based on normalized radial basis functions [Volume 8, Issue 1, 2020, Pages 107-116]
Seyyedbarzegar, Seyyed Meysam Analysis and Evaluation of External Gap Line Arrester Performance in Transmission Lines without Shielding Wire under the Effect of Lightning and Ground Parameters [Volume 10, Issue 2, 2022, Pages 13-22]
Shafaee, Meisam Metamaterial Based, Single Toroidal Phase Shifter Design Algirithm [Volume 7, Issue 1, 2019, Pages 53-60]
Shahamat, Yadollah Design of a Hybrid Enhanced Photocathode Based on Plasmonic Nano-Grating [Volume 9, Issue 2, 2022, Pages 27-33]
Shariat, Mohammad Ebrahim Analysis and Simulation of Diffraction from Metamaterials Structures by Using of Surface Integral Equations and Multi-Level Fast Multipole Method (MLFMM) and Comparison with Moment Method [Volume 10, Issue 2, 2022, Pages 23-34]
Sharif Kazemi, Esmaeel Analysis and Simulation of Influence of The Silver Ribbon Nanoparticle’s Dimensions and Refractive Index on The Efficiency of Plasmonic Amorphous Silicon Solar Cell [Volume 7, Issue 1, 2019, Pages 9-16]
Sheibani, Keyvan Analytical Modeling of Eccentric SPM Vernier Machine [Volume 7, Issue 2, 2020, Pages 53-62]
Shiri, Abbas Modeling of Electromagnetic Railgun and Analysis of its Performance [Volume 7, Issue 1, 2019, Pages 61-72]
Shiri, Abbas Modeling and Analysis of Single-sided Linear Primary Permanent Magnet Vernier Machine [Volume 8, Issue 1, 2020, Pages 61-67]
Shohani, Azin Mode Instability in the Ytterbium Doped Fiber Amplifier [Volume 8, Issue 2, 2021, Pages 33-43]
Shokri, Mohammad Optimized Design to reduce cogging torque in flux reversal motor [Volume 10, Issue 2, 2022, Pages 81-91]
Siahkari, Mohammad Javad Design and Fabrication of an Atmospheric Parameter Monitoring System for Weather Forecast [Volume 7, Issue 2, 2020, Pages 33-43]
Soltani, zahra Design and Fabrication of Low Noise Oscillator Using Active Dielectric Resonator [Volume 6, Issue 2, 2018, Pages 43-51]
Soltani-Soufiani, Javad Improving the model of Permanent Magnet Brushed DC Motor Used in Automotive Industry for Sensorless Speed Estimation [Volume 11, Issue 1, 2023, Pages 51-59]

T

Tabibi, Farangis Design of A New Structure for Transmitter and Receiver Coils in Wireless Transmission Systems with low Sensitivity in [Volume 7, Issue 2, 2020, Pages 17-24]
Taghavi, Seyyed ali Design, Simulation and Fabrication of Ultra-Wide-Band Electromagnetic Waves Absorber with Optimal Dimensions Based on Metamaterial [Volume 9, Issue 1, 2021, Pages 55-61]
Taghipour Boroujeni, S. Dynamic Modeling of Unbalanced Magnetic Pull in Eccentric Wound Rotor Induction Machine [Volume 9, Issue 1, 2021, Pages 17-25]
Taghipour Boroujeni, Samad Analytical Modeling of Eccentric SPM Vernier Machine [Volume 7, Issue 2, 2020, Pages 53-62]
Taghipour Boroujeni, Samad Dynamic modeling and investigation of the rotor circuit influence on the no-load characteristics of brushless doubly fed induction machine [Volume 8, Issue 2, 2021, Pages 97-106]
Taghipour Boroujeni, Samad The Enhancement of the brushless doubly-fed induction machine characteristics using a new rotor circuit [Volume 10, Issue 1, 2022, Pages 69-79]
Taghorabet, Noureddin The Enhancement of the brushless doubly-fed induction machine characteristics using a new rotor circuit [Volume 10, Issue 1, 2022, Pages 69-79]
Tootoonchian, Farid The Proposal of a 2-DOF Resolver for Linear Motion [Volume 10, Issue 1, 2022, Pages 81-90]
Torabi, Abdorreza Design and Implementation of a Highly Efficient Wireless Power Transfer System Using Magnetic Spiral Resonant Coupling [Volume 8, Issue 2, 2021, Pages 17-23]
Torabi, Yalda Design and Fabrication of Unbalanced Wilkinson Power Divider with Equal Port Impedances and Filtering Response with Coupled Metamaterial Transmission Lines [Volume 6, Issue 1, 2018, Pages 1-8]
Toreinia, Reza Design and Parametric Analysis of the Dual Mode Ferrite Phase Shifter with Linear Polarization [Volume 9, Issue 1, 2021, Pages 71-77]
Torkaman, Hossein Field Oriented Control of BLDC Motor Drive Using Space Vector Modulation [Volume 6, Issue 1, 2018, Pages 23-29]

V

Vali, Mozaffar Thermal and Vibration Analysis of a Dual Stator Consequent-Pole Vernier PM Machine with High Torque Density for application in Electric Vehicles [Volume 10, Issue 2, 2022, Pages 93-104]
Vosoughian, Hassan Investigation of length reduction and radiation power enhancement of short-wavelength free electron laser [Volume 10, Issue 2, 2022, Pages 105-113]

Y

Yazdi, M. Calculation of Attenuation in Rain Medium with Realistic Rain drops Shapes Modeling by the FDTD Method [Volume 8, Issue 1, 2020, Pages 1-7]

Z

Zaker, Reza Mutual Coupling and Cross Polarization Reduction of a Compact Microstrip Array Antenna Using a Pair of Parasitic Resonators [Volume 9, Issue 2, 2022, Pages 71-80]
Zaki Dizaji, Hosein Design of a Hybrid Enhanced Photocathode Based on Plasmonic Nano-Grating [Volume 9, Issue 2, 2022, Pages 27-33]
Zamanian, S. Implementation of an optimized earthing system to minimize step and touch voltage of telecommunication sites in rocky and high-altitude environments (Case Study: Bamo site) [Volume 8, Issue 2, 2021, Pages 107-117]
Zandian, Salman Low Noise Figure and High Conversion Gain CMOS LNA-Mixer for WLAN Applications [Volume 6, Issue 2, 2018, Pages 19-31]
Zarifi, Davoud Design of Power Divider Based on Gap Waveguide Technology for Use in Low Sidelobe Level 60-GHz Slot Array Antenna [Volume 7, Issue 2, 2020, Pages 97-104]
Zeinali Davarani, Roohol-Amin INVESTIGATION OF THE EFFECT OF CABLE JOINT ON THE MAGNETIC FIELDS AROUND UNDERGROUND POWER CABLES [Volume 8, Issue 2, 2021, Pages 89-96]